Welcome to CCNA 200-301 Cisco Wireless Fundamentals Exam Questions course.
In this course you will test your knowledge of CCNA 200-301 wireless exam topicsand important and useful subjects for your profession.
You want to see whether you are ready for your exam or not without paying too much for a repeat exam. You want to pass CCNA 200-301 Wireless for the first time or you failed and now you want to pass it this time, this course will create the difference between your passing and failing this time. I wish you the best and want you to join me through different tests to challenge you.
You will test yourself against these topics:
RF Fundamentals
Describe the propagation of radio waves
Frequency, amplitude, phase, wavelength (characteristics)
Absorption, reflection, diffraction, scattering, refraction, fading, free space path loss, multipath
Interpret RF signal measurements
Signal strength (RSSI, Transmit power, receive sensitivity)
Differentiate interference vs. noise
Device capabilities (smartphones, laptops, tablets)
Define SNR 1.3 Explain the principles of RF mathematics
Compute dBm, mW, Law of 3s and 10s,
Describe Wi-Fi antenna characteristics
Ability to read a radiation pattern chart
Antenna types and uses
dBi, dBd, EIRP
802.11 Technology Fundamentals
Describe basic Wi-Fi governance
Describe regional regulatory bodies (such as, FCC / ETSI/ MIC)
IEEE 802.11
Wi-Fi Alliance
Describe usable channel and power combination
Regional EIRP limitation examples
ISM, UNII frequency bands
Describe RRM fundamental
Describe 802.11 fundamentals
Modulation techniques
Channel width
MIMO / MU-MIMO
Beam forming
Spatial streams
Wireless topologies
Frame types
Implementing a Wireless Network
Describe the various Cisco wireless architectures
Describe physical infrastructure connections 3.2.a Wired infrastructures (AP, WLC, access/trunk ports, LAG) 3.3 Describe AP and WLC management access connections
Management connections (Telnet, SSH, HTTP, HTTPS, console)
IP addressing: IPv4 / IPv6
Describe the Cisco implementation of the CAPWAP discovery and join process
Master-controller
Primary-secondary-tertiary
Distinguish different lightweight AP modes
Describe and configure the components of a wireless LAN access
Identify wireless network and client management and configuration platform options
Prime infrastructure
Maintain wireless network
Perform controller configuration backups
Perform code updates on controller, APs, and converged access switches
AireOS: boot loader (FUS), image
IOS-XE: bundle, unbundle
Autonomous
Configuration of Client Connectivity
Identify authentication mechanisms
LDAP, RADIUS, local authentication, WebAuth, 802.1X,PSK
Configuring WLAN authentication mechanisms on the controller
Describe roaming
Intracontroller and intercontroller
Centralized mobility
Converged mobility
Describe wireless guest networking
Anchor controller
Foreign controller
Performing Client Connectivity Troubleshooting
Validating WLAN configuration settings at the infrastructure side
Security settings
SSID settings
Validating AP infrastructure settings
Port level configuration
Power source
AP and antenna orientation and position
Validate client settings
SSID Security
Employ appropriate controller tools to assist troubleshooting
GUI logs
CLI show commands
Monitor pages
Identify appropriate third-party tools to assist troubleshooting
OS-based Client utilities
Wi-Fi scanners
RF mapping tool
Site Survey Process
Describe site survey methodologies and their purpose
Offsite (predictive / plan)
Onsite
Predeployment (AP on a stick)
Post deployment (validation)
Describe passive and active site surveys
Identify proper application of site survey tools
Spectrum analyzer
Site surveying software
Describe the requirements of client real-time and non-real-time applications
This is an unofficial course and this course is not licensed, affiliated or trademarked with Cisco.
