What you'll learn

• All about Under Ground Piping

• Basic Definitions

• Various Rules to be followed

• General Terms : Catch basin, Manholes, Valve Pits, Diversion Pits, Invert Elevations, Listing Stations

• Various Underground Networks : Oily water, Contaminated Rain water, Cooling Water, Closed drain networks

• Trench Piping

• Composite drawings

• Scope & Responsibility Splits

  
  

  Stress Analysis: Complete content is prepared by Mr. Anup Dey (Special Thanks for valuable contribution)

• Setting Ground Work

• Documents/Input Required

• Input parameters in Caesar

• Settings Unit Systems

• Pipe/Soil Properties

• Pipeline Profile drawings

• ·Codes & Standards used

• AG & UG Pipeline

  
  

  Step By Step Modelling

• Various tools of Caeser II

• Pipeline, Fittings, Supports

• Best Practices while modeling/Analysis

• Modeling of Buried pipe

• U/G Pipe modeler Tool

• Parameters in Soil Modelers

  
  

  Load Cases, Caeser Results and Reports

• Creating Load Cases, w.r.t. Various parameters

• Analyzing Caeser results

• Generating stress reports

• Concluding Stress Results and Reports

This covers, Why UG piping is required, what basic rules need to be followed. It covers most the underground items eg. Catch basin, Manholes, Valve Pits, Diversion Pits, Invert Elevations, Listing Stations. Requirements and configurations for trench piping have also been covered. Various open and closed drain networks are also covered along with Cooling water network. Most of the critical things about Composite drawings are also covered eg What are those drawings and why those drawings are required, who are the various stakeholders involved and basic required to generate these drawings.

Various drawings, cross sectional views have been added at various stage of the course which can be very useful to understand the fundamentals.

Also, we will discuss the various scope & responsibility splits among various disciplines. all phases from Proposal to Feed to Detailed design stages have been covered to understand the scope & responsibilities of various disciplines.

In the End, Stress Analysis shall be discussed w.r.t U/G piping; where the things re discussed in details w.r.t Inputs required, Step by step Modelling in CAESER II, Various parameters, Various load cases and Stress reports.

In this course my Dear Friend Mr. Laxmikant Sawleshwarkar has helped a lot. His contributions have really helped to add more value to the content. I am sure he is going to contribute in upcoming courses too.

Dont miss to provide your feedback.