CCNA Exam v1.0 (CCNA 200-301) is a 120-minute exam associated with the CCNA certification. Questions from all the required domains are covered. The descripton of each domain is given below:

1.0 Network Fundamentals

1.1 Explain the role and function of network components

1.2 Describe characteristics of network topology architectures

1.3 Compare physical interface and cabling types

1.4 Identify interface and cable issues (collisions, errors, mismatch duplex, and/or speed)

1.5 Compare TCP to UDP

1.6 Configure and verify IPv4 addressing and subnetting

1.7 Describe the need for private IPv4 addressing

1.8 Configure and verify IPv6 addressing and prefix

1.9 Describe IPv6 address types

1.10 Verify IP parameters for Client OS (Windows, Mac OS, Linux)

1.11 Describe wireless principles

1.12 Explain virtualization fundamentals (server virtualization, containers, and VRFs)

1.13 Describe switching concepts

2.0 Network Access

2.1 Configure and verify VLANs (normal range) spanning multiple switches

2.2 Configure and verify interswitch connectivity

2.3 Configure and verify Layer 2 discovery protocols (Cisco Discovery Protocol and LLDP) 2.4 Configure and verify (Layer 2/Layer 3) EtherChannel (LACP)

2.5 Interpret basic operations of Rapid PVST+ Spanning Tree Protocol

2.6 Describe Cisco Wireless Architectures and AP modes

2.7 Describe physical infrastructure connections of WLAN components (AP, WLC, access/trunk ports, and LAG)

2.8 Describe AP and WLC management access connections (Telnet, SSH, HTTP, HTTPS, console, and TACACS+/RADIUS)

2.9 Interpret the wireless LAN GUI configuration for client connectivity, such as WLAN creation, security settings, QoS profiles, and advanced settings

3.0 IP Connectivity

3.1 Interpret the components of routing table

3.2 Determine how a router makes a forwarding decision by default

3.3 Configure and verify IPv4 and IPv6 static routing

3.4 Configure and verify single area OSPFv2

3.5 Describe the purpose, functions, and concepts of first hop redundancy protocols

4.0 IP Services

4.1 Configure and verify inside source NAT using static and pools

4.2 Configure and verify NTP operating in a client and server mode

4.3 Explain the role of DHCP and DNS within the network

4.4 Explain the function of SNMP in network operations

4.5 Describe the use of syslog features including facilities and levels

4.6 Configure and verify DHCP client and relay

4.7 Explain the forwarding per-hop behavior (PHB) for QoS, such as classification, marking, queuing, congestion, policing, and shaping

4.8 Configure network devices for remote access using SSH

4.9 Describe the capabilities and function of TFTP/FTP in the network

5.0 Security Fundamentals

5.1 Define key security concepts (threats, vulnerabilities, exploits, and mitigation techniques)

5.2 Describe security program elements (user awareness, training, and physical access control)

5.3 Configure and verify device access control using local passwords

5.4 Describe security password policies elements, such as management, complexity, and password alternatives (multifactor authentication, certificates, and biometrics)

5.5 Describe IPsec remote access and site-to-site VPNs

5.6 Configure and verify access control lists

5.7 Configure and verify Layer 2 security features (DHCP snooping, dynamic ARP inspection, and port security)

5.8 Compare authentication, authorization, and accounting concepts

5.9 Describe wireless security protocols (WPA, WPA2, and WPA3)

5.10 Configure and verify WLAN within the GUI using WPA2 PSK

6.0 Automation and Programmability

6.1 Explain how automation impacts network management

6.2 Compare traditional networks with controller-based networking

6.3 Describe controller-based, software defined architecture (overlay, underlay, and fabric)

6.3.a Separation of control plane and data plane

6.3.b Northbound and Southbound APIs

6.4 Compare traditional campus device management with Cisco DNA Center enabled device management

6.5 Describe characteristics of REST-based APIs (CRUD, HTTP verbs, and data encoding)

6.6 Recognize the capabilities of configuration management mechanisms Puppet, Chef, and Ansible

6.7 Recognize components of JSON-encoded data

---------------------------------------------------------

These Cisco CCNA 200-301 Tests 2022 has the following distinctive characteristics:

· MORE THAN 300 QUESTIONS in 2 Full Exams

· ACTUAL EXAM ENVIRONMENT

· EXPLANATIONS and REFERENCE LINKS where explanation is required

· RESPONSIVE INSTRUCTORS

· MOBILE-COMPATIBLE

Exam results

The Cisco CCNA 200-301 Tests 2022 Exam is a pass or fail exam. The exam is scored against a minimum standard established by Cisco who follow certification industry best practices and guidelines.

Your score report could contain a table of classifications of your performance at each section level. This information is intended to provide general feedback about your exam performance. The exam uses a compensatory scoring model, which means that you do not need to achieve a passing score in each section. You need to pass only the overall exam.

Each section of the exam has a specific weighting, so some sections have more questions than other sections have. The table contains general information that highlights your strengths and weaknesses. Use caution when interpreting section-level feedback.

---------------------------------------------------------------------------------------------

Our experts have put together all their effort in the preparation of these practice exams.

This course has a very low price compared to the exam again and again. In addition, these practice exams take the candidates to pass the Cisco CCNA 200-301 Tests 2022 Exam in their first attempt.