End of the course you will be able to learn / become Master in create the PFMEA without any error. That's how course content is developed to understand the each column of PFMEAtemplate and Control plan as per IATF16949:2016. Course content is designed to learn by all kinds of manufacturing and service industries.

We could call " Effective PFMEA" only when identified failure modes are not occurred and zero customer / warranty failures. This can be achieved by properly identify the " Requirements" and cascade to analysis. In this course mainly focused on how to feed inputs (requirements), get outputs (Process characteristics) and approach used to define the recommended action. Usually common mistake do by most of the people during rating the secondary SxOxD. Very simple logics applied to selection of secondary SODratings.

Another important topic is identify the Special characteristics based on severity rating and classification of characteristics with cascade to control plan for special control.

As per IATF16949 clause 8.5.1.1 requirement is PFMEA & Control plan shall have linkage. You will learn, logic and idea behind this method. The reason behind the requirement is, every failure mode and cause of failure shall be under control to prevent the occurrence of defect.

Let's access this course to become expert in PFMEA.