In This level you will learn how to revise your model and checking a lot of effected factors in structural design .Those factors will be mentioned below :

Part 1 ( ETABS Model )

1. Check Load Combinations .

2. Check Static Seismic Forces AS Per UBC97.

3. Check Dynamic Seismic Forces AS Per UBC97.

4. Check P-Delta Analysis

5. Check the Mass Source.

6. Check The Time Period.

7. Check The Mode Shapes.

8. Check The Wind Tunnel .

9. Check The Base Shear As Per UBC97

10. Check Displacement Per Wind As Per ASCE7-16

11. Check The Overturning Moment.

12. Check Seismic Drift As Per UBC97

13. Design All Members Using ACI318M-14

Part 2 ( SAFE Model )

1. Check The Materials, Slabs thickness, Rebars and loads

2. Check Load Combinations As Per ACI318M-14

3. Draw the strips for designing .

4. Check Automatic Mesh.

5. Check the Stiff Areas.

6. Check The Deflection As Per ACI318M-14

7. Design The Slab AS Per ACI318M-14

8. Check The Punching AS Per ACI318M-14

At the end you will have the required information to start designing your first tower or skyscraper building with the acceptable values from designed codes.