In this course you will learn the working of centrifugal chiller. you will learn the basic principles, cycles and designing of chillers. this course is basic to intermediate level course for DAE students and engineer this course will enhance your technical skill . firstly you will learn the working principles and maintenance of centrifugal type chillers, absorption type chillers, air cooled chillers . after doing this course you are familiar with all these types of chillers and your chances of getting jobs are increased. in second step you will also learn about the designing of chillers using Autodesk Revit. Autodesk Revit is one of the most advance tool for Designing MEP system using this tool you will design different plants. now a days the use of centrifugal chiller is increased because its more efficient then other types of chiller so if you will successfully complete this course , job opportunities will be increased for you.
in this course you will learn about
refrigeration cycles
vapour compression cycle
vapour compression cycle application
CENTRIFUGAL CHILLER WORKING
centrifugal compressor
VARIABLE FREQUENCY DRIVE
CHILLER DESIGNING USING REVIT 2019
water absorption refrigeration system
Ammonia water refrigeration system
Lithium Bromide Absorption Refrigeration System
Air Cooled Chiller
Variable refrigerant volume (VRV OR VRF)
now a days the use of centrifugal chiller is increased because its more efficient then other types of chiller so if you will successfully complete this course , job opportunities will be increased for you.
chiller maintenance
How often should a chiller be serviced?
Most chiller manufacturers recommend cleaning condenser tubes annually, since they typically are part of an open system, and they recommend cleaning evaporator tubes once every three years for closed systems. But if the evaporator is part of an open system, they recommend periodic inspection and cleaning.
