The objective of the course is to provide the participant with the basic and advanced tools of the modeling program, not only will a Design of the structural elements of the building be reached, the building will also be analyzed based on the detailed plans, using the tool most powerful in the market in the development of structural projects software CSI ETABS Ultimate

In this project the structural calculation of an 8-level building for housing use will be carried out, with the incorporation of the ladder in the model, elevator, and cutting walls that is the main focus of this course.

The internal spreadsheets of the CSI ETABS Ultimate software will be explained in detail. Depending on the ACI 318-14 standard. The detailed structural elements (Cutting Walls) in the AUTOCAD software will be reached.

Content:

Lecture 1: Introduction

Lecture 2: Definition of grid and materials

Lecture 3: Definition of cracked sections in columns

Lecture 4: Definition of cracked sections in beams

Lecture 5: Definition of cracked walls and factor system CD

Lecture 6: Drawing of columns, beams, walls and slabs

Lecture 7: Staircase drawing and assignment of escale loads

Lecture 8: Load assignment to the elevator and malled of wall

Lecture 9: Generalities of wall and assignment of rigid diaphragm

Lecture 10: NSR-10 Design spectrum

Lecture 11: NSR-10 P2 Design spectrum

Lecture 12: NSR-10 P3 Design spectrum

Lecture 13: Design spectrum in ETABS NSR-10

Lecture 14: Definition of mass, number of modes, standard NS

Lecture 15: 15 method 30%, SRSS load combinations

Lecture 16: Load combinations, participatory mass

Lecture 17: Generalities in beams and columns

Lecture 18: Derivative verification

Lecture 19: Correction of dynamic cut vs static P1

Lecture 20: Correction of dynamic cut vs static P2

Lecture 21: Correction of dynamic cut vs static P3

Lecture 22: Cutting walls ACI318-14

Lecture 23: Cutting walls ACI318-14 P2

Lecture 24: ETABS Cutting walls

Lecture 25: Detailed in drawings, wall of PB. P1

Lecture 26: Detailed in drawings, wall of PB. P2

Lecture 27: Detailed in drawings, wall of P1

Lecture 28: Detailed in drawings, P2 wall

Lecture 29: Detailed in drawings, P3 wall

Lecture 30: Analysis of the walls P1 assigned to ETABS

Lecture 31: Analysis of the walls P2 assigned to ETABS

Lecture 32: Analysis of the walls assigned to ETABS

Lecture 33: Combination of walls with columns in ETABS

#AulaGEO

The course is in English and contains subtitles in the following languages, German, Arabic, Chinese, Korean, Danish, French, Greek, Dutch, Hebrew, Indonesian, Italian, Japanese, Portuguese, Polish, Persian, Russian, Swedish, Thai, Turkish and Vietnamese.