Sample Questions:
Q) Which statement describes a step in provisioning SPBM in an enterprise network?
A. Configure IP addresses on the core links.
B. Enable SPBM and IS-IS globally on all nodes and on the core facing links.
C. Configure the MAC table.
D. Configure L2 and L3 VSNs on the core SPBM nodes.
Q) Which VLAN/VLANs should be included on the Inter Switch Trunks (IST) for a proper functioning split Multi-Link (SMLT) configuration?
A. Only VLAN 101
B. Only VLAN 1 and the IST
C. Only the VLANs that are also included on the SMIT/SLT uplinks3
D. The IST VLAN and all the VLANs that are included on all SMLT/SLT links
Q) A technician wants to control the routes being added to the routing table from the BGP routing table. Which statement describes how to do this?
A. BGP accept filters are applied to all routes from received by BGP peers.
B. BGP accept filters are applied only to external route information.
C. BGP accept filters are applied to all incoming and outgoing ports.
D. BGP adds all new priority routes to the routing table.
Q) When multiple VLANs are used, Dynamic Host Control Protocol (DHCP) relay is required to get the DHCP information from the end user VLAN DHCP server. Which statement about how to enable DHCP relay is true?
A. The physical VLAN IP address is configured as the DHCP relay agent on each VLAN requiring a DHCP relay.
B. The IP address of the DHCP server is configured as the relay agent globally on all switches that do not directly attach to the DHCP server.
C. The MAC address of the DHCP server configured as the DHCP relay agent on each VLAN requiring the DHCP relay agent.
D. The DHCP relay is configured globally and is automatically applied to all VLANs requiring a DHCP relay.
Q) Which feature can be used on Split Multi-Link Franking (SMLT) with a Soft Down option?
A. Extended control packet limit (ext-CP)
B. Discard untagged frames
C. Simple Loop Prevention Protocol (SLPP)
D. Virtual Link Aggregation Protocol (VLACP)
Q) To confirm that routed split Multi-Link Trunking (RSMLT0 will work on a set of VLANs, which network design aspect should be considered?
A. RSMLT is enabled on each SMLT VLAN on which the function is required.
B. RSMLT is enabled on the VLAN group.
C. Router 1 always owns the network.
D. RSMLT is enabled on all SMLT VLANs.
A technician is configuring 802.1Q tagging, Virtual Link Aggregation Control Protocol (VLACP) with short timeout, and untagged frames to be discarded. Which part of the network is being configured?
A. IST
B. The out-of-band management port
C. The edge access ports
D. The uplinks
